Epson LS12000 vs JVC DLA-NZ500: 4K120 Gaming and Bright Rooms vs Native 4K Cinema
Dim the lights on a 120-inch screen and cue up a nocturnal 4K Blu-ray like Dune: Part Two or a 120Hz console game, and you will see right away why the Epson Pro Cinema LS12000 ($5,999.00) and JVC DLA-NZ500 ($5,999.95, currently $1,000 off its $6,999.95 MSRP) anchor so many $6,000 theater builds. Separated by 95 cents on the projector itself, these two three-chip laser projectors pursue genuinely distinct optical priorities: Epson pairs 2,700 lumens of equal color and white output with a 2.1x motorized glass lens, 4K120 gaming, and a factory ceiling mount in the box, while JVC brings three native 4K D-ILA reflective panels, 40,000:1 native contrast, and Gen 2 Frame Adapt HDR tone mapping to light-controlled cinema rooms.
Projector Overview and Room Fit
Both models ship in matte-black theater housings built for permanent ceiling or rear-shelf installations with external surround sound and dedicated media sources. Because neither uses a single-chip color wheel, both are completely free of rainbow artifacts, leaving your room geometry, ambient light, screen size, and gaming habits to decide which optical engine fits best.
Epson Pro Cinema LS12000
Built for high-output versatility across dedicated theaters and multi-purpose media rooms, combining 2,700 lumens, expansive 2.1x motorized optics, 10 lens memories, and sub-20 ms 4K120 HDMI 2.1 gaming.
- Imaging Engine
- 3 x 0.74" 3LCD + 4-Way 4K Shift
- Rated Brightness
- 2,700 lm Color & White
- Contrast Rating
- 2,500,000:1+ Dynamic
- Gaming & HDMI
- 4K120 (< 20 ms), eARC, CEC
- Lens & Shift
- 2.1x Glass, ±96.3% V / ±47.1% H
JVC DLA-NZ500
Engineered as a compact native 4K cinema specialist, pairing Gen 3 0.69-inch D-ILA devices and 40,000:1 native contrast with frame-by-frame Gen 2 Frame Adapt HDR for dark rooms.
- Imaging Engine
- 3 x 0.69" Gen 3 Native 4K D-ILA
- Rated Brightness
- 2,000 lm BLU-Escent Laser
- Contrast Rating
- 40,000:1 Native / Infinite Dyn.
- Gaming & HDMI
- 4K60 (~34 ms Low Latency), 32 Gbps
- Lens & Shift
- 1.6x 80 mm, ±70% V / ±28% H
Where Each Projector Shines
As a calibrator, I always start with the room and screen before looking at a spec table. Light reflected off pale walls or a ceiling raises your screen's black floor faster than any menu adjustment can lower it, while a dark, velvet-treated room lets native contrast define three-dimensional depth.
Choose the Epson LS12000 for Big Screens, Mixed Lighting, and 4K120 Gaming
- 130-inch to 150-inch+ screens or moderate ambient light: 2,700 lumens of IDMS color and ISO white output keep sports, concerts, and HDR highlights lively even when dim sconces stay on or screen area climbs.
- Long throws and off-center mounts: The 1.35 to 2.84:1 zoom and ±96.3% vertical / ±47.1% horizontal shift reach rear walls up to 24.75 feet back on a 120-inch screen, backed by 10 saved lens presets.
- PS5, Xbox Series X, and 120Hz PC play: Dual HDMI 2.1 ports support 4K120 and 1080p120 below 20 ms, plus HDMI eARC, CEC, a 12V trigger, and an included Pro Cinema ceiling mount.
Choose the JVC DLA-NZ500 for Dedicated Dark Rooms and Native 4K Film
- Light-sealed batcaves and dark theaters: 40,000:1 native contrast and a 16-step manual lens aperture preserve letterbox bars, starfields, and shadow gradations without relying on aggressive laser pumping.
- Hands-off UHD Blu-ray and HDR streaming: Gen 2 Frame Adapt HDR reads MaxCLL and Display Mastering Luminance metadata dynamically, adjusting tone curves frame by frame or scene by scene.
- Native 4096 x 2160 pixel structure and hushed enclosures: Three Gen 3 D-ILA devices deliver tight pixel fill factor inside a redesigned 17.72-inch-wide chassis with front intake and rear exhaust.
Full Specification Comparison
Every specification below comes directly from official Epson and JVC documentation, live ProjectorScreen.com product listings, and our published bench reviews.
| Specification | Epson Pro Cinema LS12000 | JVC DLA-NZ500 (RS1200) |
|---|---|---|
| Live Price | $5,999.00 | $5,999.95 (on sale from $6,999.95 MSRP) |
| Availability & SKU | In Stock, Quick Ship (Epson-LS12000, Black; model V11HA47020MB) |
Leaves Warehouse within 2-3 Weeks (JVC-DLA-NZ500, Black; optically identical to DLA-RS1200) |
| Imaging Panels | Three 0.74" 1920 x 1080 12-bit Poly-silicon TFT 3LCD chips | Three 0.69" Gen 3 Native 4K D-ILA (reflective LCoS) devices |
| Displayed Resolution | 3840 x 2160 (8.29M pixels on screen via 4-way dual-axis glass Precision Shift Plate; accepts up to 4096 x 2160) | 4096 x 2160 native 17:9 (8.85M pixels) and 3840 x 2160 16:9 |
| Laser Light Engine | Multi-array blue laser diodes + yellow phosphor (up to 20,000 hours; 50% to 100% power steps) | BLU-Escent blue laser diode phosphor (up to 20,000 hours; 101-step 0 to 100 fine slider) |
| Rated Brightness | 2,700 lumens Color (IDMS 15.4) / 2,700 lumens White (ISO 21118) | 2,000 lumens |
| Rated Contrast | 2,500,000:1+ dynamic contrast (UltraBlack optical compensation filter; Normal & High Speed laser dimming) | 40,000:1 native contrast / Infinite:1 dynamic (-15 to 0 lens aperture + Dynamic CTRL Off, Low, High, Balanced) |
| Wide Gamut Method | Filterless (~90% DCI-P3 reported in our bench review without a light-reducing cinema filter) | Filterless (93% DCI-P3 and 70% BT.2020 measured in CIE 1976 u'v' without a light-reducing filter) |
| HDR Formats | HDR10, HDR10+, HLG | HDR10, HDR10+, HLG, FILMMAKER MODE |
| HDR Tone Management | 32-bit ZX Picture Processor with Real-Time Scene Adaptive Correction and 16-step manual HDR10/HLG tone slider | Gen 2 Frame Adapt HDR (Frame by Frame or Scene by Scene reading MaxCLL/DML), HDR Quantizer (Auto Normal/Auto Wide + 5 levels), Deep Black |
| Lens Assembly | 2.1x motorized 15-element precision all-glass VRX lens (f/2.0-3.0) with powered sliding lens shutter | 1.6x motorized 80 mm, 15-element, 11-group 4K lens with removable shipping/storage cap |
| Motorized Lens Shift | ±96.3% vertical / ±47.1% horizontal | ±70% vertical / ±28% horizontal (16:9) |
| Throw Ratio & Distances | 1.35-2.84:1 (100" 16:9: 9.81-20.63 ft; 120" 16:9: 11.77-24.75 ft; 50"-300" screen range) | 1.34-2.14:1 in 16:9 (100" 16:9: 9.78-15.72 ft; 120" 16:9: 11.75-18.90 ft; 60"-200" screen range) |
| Lens & Screen Presets | 10 motorized Lens Position memories for 16:9, 2.39:1 scope, and 4:3 framing | 5 named Installation Modes storing zoom, shift, focus, pixel adjust, masking, and 3-digit Screen Setting RGB code |
| HDMI & Bandwidth | 2 x HDMI 2.1 (HDCP 2.3; 4K120 10-bit HDR support; 40 Gbps in our bench review, rated up to 48 Gbps by Epson; ARC/eARC on HDMI 2; HDMI-CEC) | 2 x HDMI (HDCP 2.3; 32 Gbps bandwidth supporting up to 4K60 12-bit 4:4:4) |
| Gaming & Input Lag | 4K120, 4K60, 1080p120, 1080p60; rated < 20 ms input lag in Fast image processing mode | Up to 4K60 and 1080p60; Low Latency mode (~34 ms measured at 60Hz in our bench test) |
| Motion Processing | Frame Interpolation up to 4K60 (Off, Low, Normal, High in Fine processing mode) | Clear Motion Drive black-frame insertion at 60Hz (Off, Low, High; true 24p cadence preserved without soap-opera interpolation) |
| System Integration | External AVR/streamer ready, with HDMI 2 eARC audio return, HDMI-CEC, 12V trigger out, RS-232C, RJ-45 LAN, and 2 x USB-A power ports | Dedicated AVR/processor video architecture with RJ-45 LAN IP control/autocalibration and USB-A firmware/settings backup |
| Dimensions, Weight & Airflow | 20.5" W x 7.6" H x 17.6" D (with feet); 28.0 lb; 22-30 dB; front exhaust vents | 17.72" W x 7.13" H x 18.86" D; 32.2 lb; 23 dB at minimum laser; front intake with rear exhaust |
| Mounting Hardware in Box | Custom Pro Cinema ceiling mount and matching rear cable cover included in the box | Ceiling mount sold separately (uses four M5 mounting points on bottom chassis) |
| Manufacturer Warranty | 3-year limited warranty with 2-business-day full-unit replacement, free shipping, and lifetime PrivateLine phone support | 3-year parts and labor limited warranty through authorized JVC dealers |
Contrast, Brightness, and HDR Tone Management
When I calibrate projectors side by side, the quickest way to tell reflective LCoS apart from transmissive 3LCD is a dark scene punctuated by a single torch or cockpit instrument panel. Because JVC's D-ILA light engine holds a 40,000:1 native contrast ratio before any dynamic laser dimming kicks in, dark space and shadow detail sit against an inkier floor while bright highlights stay crisp in the same frame. You can also step JVC's internal lens aperture down in 16 increments (-15 to 0) and dial the BLU-Escent laser across 101 steps (0 to 100), trading surplus peak luminance for even deeper native blacks on screens under 130 inches.
Epson builds the LS12000 around high optical throughput and dynamic headroom. Its multi-array laser engine delivers a full 2,700 lumens in both white and RGB color, giving it roughly 35% higher rated output than JVC's 2,000-lumen spec. Paired with Epson's UltraBlack polarization compensation filter, the LS12000 still turns in strong native contrast for a 3LCD design, and its High Speed laser dimming can fade completely to black during title transitions. Where you feel those extra lumens immediately is on a 135-inch to 150-inch screen, an acoustically transparent weave with 0.8 to 0.9 gain, or an evening football broadcast with recessed room lights dimmed to 20%.
HDR handling follows that same philosophical split. UHD Blu-rays and streaming titles are mastered anywhere from 1,000 to 4,000+ nits, whereas a home theater screen typically operates between 80 and 225 nits. JVC's Gen 2 Frame Adapt HDR automates that compression inside the projector: it reads MaxCLL and Display Mastering Luminance metadata, analyzes incoming video either frame by frame or scene by scene, and uses HDR Quantizer (including Auto Wide for punchier highlights) plus Deep Black tone control to protect bright cloud textures and dark shadow steps without constant remote adjustments. Epson supports HDR10, HDR10+, and HLG with ZX Real-Time Scene Adaptive Correction and a fast 16-step HDR slider right on the remote. Once you set that slider for a 1,000-nit disc versus a 4,000-nit disc, the LS12000 rewards you with energetic specular punch, and enthusiasts using an external video processor or HTPC can feed Epson's extra lumen reserve directly.
One bright engineering choice both brands share at this tier is achieving wide color without sliding a physical cinema color filter into the light path. Color filters on higher-tier projectors often swallow 25% to 35% of available lumens, whereas both the LS12000 (~90% DCI-P3 in our review) and DLA-NZ500 (93% DCI-P3 measured in CIE 1976 u'v') preserve their full light engines while rendering saturated HDR hues.
Native 4K D-ILA vs 4-Way Pixel-Shifted 3LCD
Walk right up to the screen with a photographer's loupe and JVC's native 0.69-inch Gen 3 D-ILA chips make their case immediately. Reflective LCoS places the control circuitry behind the mirror layer rather than between pixels, yielding an exceptionally tight inter-pixel gap and native 4096 x 2160 addressability (with standard 3840 x 2160 16:9 framing selectable in the menu). JVC backs that up with whole-screen and 10 x 10 zone Pixel Adjust in refined 1/8-pixel steps, letting a patient installer converge red, green, and blue subpixels until fine film grain and 4K UI text look tack-sharp.
Step back to a normal 10-foot to 14-foot seating distance, though, and Epson's dual-axis 4-way Precision Shift Glass Plate narrows that resolution gap far more than raw panel numbers suggest. Unlike older two-phase diagonal shifters that put 4.15 million pixel phases on screen, the LS12000 shifts its three 0.74-inch 1080p LCD panels across four discrete positions per frame to address all 8.29 million pixels of a 3840 x 2160 UHD signal, paired with a 15-element precision all-glass VRX lens that holds crisp focus from center to corner. At typical 1.2x-screen-width seating distances, fine textures on both projectors resolve cleanly, and your eye notices JVC's native contrast floor and Epson's highlight pop long before pixel structure.
Lens Shift, Throw Distance, and Scope Screen Memories
If you are retrofitting an existing mount or placing a projector on a back-wall soffit, lens reach can settle this decision before picture modes ever enter the conversation. Both projectors start right around 9.8 feet for a 100-inch 16:9 image and 11.8 feet for a 120-inch 16:9 image, so tight basements work equally well with either chassis. At the telephoto end, Epson's 2.1x zoom reaches 20.63 feet on a 100-inch screen and 24.75 feet on a 120-inch screen, giving you nearly five to six extra feet of rear-wall flexibility beyond JVC's 1.6x lens (15.72 feet for 100 inches; 18.90 feet for 120 inches).
Lens shift and scope-screen workflows also reward careful planning. Epson's ±96.3% vertical and ±47.1% horizontal motorized shift lets you tuck the chassis high against a ceiling or off-axis from a support column without touching digital keystone, and its 10 lens memories easily cover 16:9, 2.39:1 Cinemascope, 1.85:1, and 4:3 aspect ratios. JVC's ±70% vertical and ±28% horizontal 16:9 shift handles standard ceiling drops and centered rear shelves cleanly, and its 5 named Installation Modes go beyond lens coordinates to store masking, convergence, and a 3-digit Screen Setting code that adjusts RGB balance for specific screen surfaces. Note that lens shift envelopes on both projectors follow an elliptical boundary, meaning maximum horizontal offset decreases as you approach maximum vertical offset.
Pay attention to cabinet airflow and mounting hardware before drilling into joists. Epson vents warm air out the front bezel, making it forgiving inside shallow rear wall niches, and it includes both a substantial quick-release Pro Cinema ceiling mount and a rear cable cover in the carton, plus a motorized sliding lens shutter that closes automatically at power-down. JVC redesigned the NZ500 with 35% less cabinet volume than its previous DLA-NZ7 laser chassis (17.72" W x 7.13" H x 18.86" D, 32.2 lb), pulling cool air through the front grille and exhausting warm air out the back, so leave generous rear clearance inside hush boxes or bookcases and budget for a compatible ceiling mount (fastened into the four bottom M5 mounting points after removing the feet).
Gaming Input Lag, Motion Processing, and System Integration
For households where a PlayStation 5, Xbox Series X, or high-refresh gaming PC shares the theater rack with a 4K Blu-ray player, the Epson LS12000 brings true high-frame-rate HDMI 2.1 hardware. Both HDMI ports carry HDCP 2.3 and accept 4K at 120Hz as well as 1080p at 120Hz, dropping input lag below 20 ms when you switch Image Processing from Fine to Fast. On a 120-inch screen, cutting frame delivery time in half at 120Hz makes camera pans in Forza or timing windows in action titles feel snappy and immediate. For 24p sports or broadcast viewing up to 4K60, switching Epson back to Fine processing unlocks four settings of Frame Interpolation.
JVC designs the DLA-NZ500 deliberately around cinema playback and 60Hz sources. Its dual 32 Gbps HDMI inputs accept signals up to 4K60, and engaging Low Latency mode yielded roughly 34 ms of input lag at 60Hz in our bench test, which feels comfortable for narrative single-player adventures and turn-based RPGs while leaving competitive 120Hz shooters in Epson's lane. Instead of motion-smoothing frame interpolation, JVC equips the NZ500 with Clear Motion Drive black-frame insertion (Low and High at 60Hz) alongside pristine 24p film cadence.
Audio and control wiring follow each projector's system philosophy. If you connect a streaming player directly to the projector or route audio back down a single long optical HDMI run to a soundbar or receiver, Epson's HDMI 2 port provides ARC and eARC audio return, alongside HDMI-CEC power sync, a 12V screen trigger, RS-232C serial control, and RJ-45 LAN. JVC streamlines the NZ500 down to pure theater essentials: buttonless top and side panels, a single rear power switch, a compact backlit remote, two HDMI inputs, USB-A backup, and RJ-45 LAN for IP control systems and JVC autocalibration software, assuming an AV receiver or processor handles all source switching ahead of the projector.
ProjectorScreen.com Bench Tests and Calibrated Accuracy
To keep our lab data transparent under my comparative byline, the bench measurements and category scores below come from our dedicated individual evaluations by Dave Harper in our Epson LS12000 full review (published April 27, 2023) and Alan Young in our JVC DLA-NZ500 full review (published December 3, 2024). Because each reviewer measured on a different screen gain and throw setup, treat their contrast and nit figures as real-world proof of what each projector achieves in its respective test room rather than a controlled single-screen shootout.
In Dave Harper's evaluation on a 1.3-gain Stewart StudioTek 130 G4 white screen in a darkened room (plus ambient-light testing on an ALR surface), the uncalibrated LS12000 at 100% laser posted 5,759:1 native contrast in Dynamic mode (with 146:1 ANSI contrast and full laser shutoff in Normal and High Speed dynamic dimming), 3,951:1 native / 19,369:1 dynamic in Natural, and 4,073:1 native / 19,917:1 dynamic in Cinema. After a 2-point and multi-point grayscale and CMS calibration in Natural mode, SDR luminance hit 112.1 nits on screen with grayscale DeltaE 2000 errors holding between 0.62 and 1.44 (well below the visible threshold of 2.0) and gamma tracking cleanly between 2.3 and 2.4.
In Alan Young's evaluation on a 100-inch 1.0 unity-gain screen from a 12-foot throw, the JVC DLA-NZ500 measured 1,960 lumens in High Bright mode (within 2% of JVC's 2,000-lumen claim) and 1,715 lumens at 6500K. Native off-lens contrast spanned roughly 30,000:1 to 50,000:1 depending on zoom and aperture. Dialed in for reference SDR at 105 nits (Laser Power 46, Aperture -12), Alan recorded 35,274:1 off-screen native contrast with a 0.003-nit black floor, 33,153:1 on his multi-point grayscale run, an average grayscale DeltaE 2000 of 0.3, a ColorChecker average of 0.4, and a dead-on 2.399 gamma. In calibrated D65 HDR (Frame Adapt HDR 1, Frame by Frame, Auto Wide, Laser 100, Aperture -2), his 100-inch screen reached 225 nits on a standard window and 200 nits full-field.
Bench Review Category Ratings
Epson LS12000 Bench Scores (April 27, 2023)
JVC DLA-NZ500 Bench Scores (December 3, 2024)
What Verified Owners Experience in Real Rooms
Specs tell you what happens on a test bench; customer installations tell you how each chassis behaves once it is bolted to a ceiling or tucked onto a rear shelf. Every customer review on both ProjectorScreen.com product pages comes from a Stamped Verified Buyer (zero third-party syndicated reviews).
Epson LS12000 Verified Buyer Feedback
4.93/5 across 30 Verified Buyer reviews
“We were able to put the image exactly where it belonged without digital correction, and the projector runs so quietly that once the movie begins, I essentially forget it’s above me.”
Leo L., September 24, 2026 · 5.0/5 · Verified Buyer
“In my media room I am running the LS12000 in Cinema mode at 75% power, and the picture on my 100" white screen is bright enough to watch with the lights on”
Don S., December 4, 2024 · 5.0/5 · Verified Buyer
“There is no noticeable lag when gaming on an Xbox series X.”
Tom M., March 30, 2024 · 4.0/5 · Verified Buyer
JVC DLA-NZ500 Verified Buyer Feedback
4.75/5 across 4 Verified Buyer reviews
“The projector really shines with every possible source”
Chetan, May 13, 2025 · 5.0/5 · Verified Buyer
“The blacks are deep and the colors are amazing. ... It’s not the brightest but my HT has no light leakage so it’s perfectly fine. Also, I’ve never noticed the fan noise.”
Dewthedru, May 11, 2025 · 5.0/5 · Verified Buyer
“I can shelf mount the projector in the rear of my room and be able to adjust the projected picture with zero distortion to the screen surface.”
Aaron R., May 1, 2025 · 5.0/5 · Verified Buyer
How to Make the Right Call for Your Room
Having calibrated both 3LCD and D-ILA light engines across dozens of screen materials, I love that $6,000 buyers get two genuinely specialized optical tools rather than mild variations of the same box. Pick the JVC DLA-NZ500 if your room has dark walls and controlled light, movies sit at the center of your nights, and you want native 4K D-ILA pixel density, deep 40,000:1 native blacks, and automatic Gen 2 Frame Adapt HDR right out of the carton. Pick the Epson Pro Cinema LS12000 if you are lighting up a 135-inch to 150-inch+ screen, watching sports with dim room lighting, mounting beyond 19 feet on a 120-inch screen, gaming at 4K120, or valuing an in-stock package that ships with its own ceiling mount and 2-business-day replacement coverage.
Talk Through Your Throw Distance and Screen Gain with Our Team
Need a sanity check on whether your ceiling drop, throw distance, or screen fabric favors Epson's 2,700-lumen 2.1x optics or JVC's native 4K D-ILA contrast? Call our projection specialists at 888-392-4814 or reach out on our ProjectorScreen.com contact page, and we will calculate exact offset clearances and screen pairings for your room.
Epson LS12000 vs JVC DLA-NZ500 FAQ
Are the Epson LS12000 and JVC DLA-NZ500 really the same total investment?
The projectors themselves sit 95 cents apart ($5,999.00 for the Epson LS12000 versus $5,999.95 on sale for the JVC DLA-NZ500), though total installation cost shifts once you factor in hardware. Epson includes its custom Pro Cinema ceiling mount and rear cable cover in the box along with 2-business-day full-unit replacement coverage, whereas JVC's ceiling mount is purchased separately.
How visible is JVC's native 4K resolution advantage over Epson's 4-way pixel shifting?
Close to the screen, JVC's three 0.69-inch native 4096 x 2160 D-ILA panels show finer pixel structure and higher fill factor than transmissive LCD grids. From a typical 10-foot to 14-foot couch, Epson's dual-axis 4-way Precision Shift Glass Plate puts all 8.29 million UHD pixels on screen through a crisp 15-element glass lens, so native contrast and screen brightness stand out much more than pixel edges.
Which projector pairs better with a 135-inch to 150-inch screen or acoustically transparent weave?
Epson's 2,700-lumen rating gives you extra headroom when screen area grows past 130 inches or when a woven acoustically transparent screen has a 0.8 to 0.9 gain factor. In a pitch-dark room with dark walls, the 2,000-lumen JVC DLA-NZ500 still handles 120-inch to 140-inch screens gracefully while preserving much deeper native black levels.
Can both projectors switch between 16:9 TV and a 2.39:1 Cinemascope screen without an anamorphic lens?
Yes, both feature motorized zoom, focus, and lens shift with saved presets so you can zoom between 16:9 and 2.39:1 at the touch of a button. Epson provides 10 lens position memories with a wider 2.1x zoom range, while JVC provides 5 full Installation Modes that also store digital masking, pixel convergence, and screen color profiles.
How should I set up gaming consoles with each projector?
Connect a PS5, Xbox Series X, or gaming PC through an HDMI 2.1 AVR (or directly with HDMI 2.1 eARC audio return) to the Epson LS12000 and select Fast image processing for 4K120 or 1080p120 gameplay under 20 ms. With the JVC DLA-NZ500, set your console output to 4K60, route audio through your AV receiver, and enable Low Latency mode (~34 ms).
Does JVC's Frame Adapt HDR or Epson's ZX processor eliminate the benefit of professional calibration?
Dynamic tone management handles HDR brightness mapping, while grayscale and gamut calibration align white balance (D65) and color tracking to your exact screen gain and room reflections. Both projectors calibrated to sub-1.5 DeltaE 2000 reference accuracy in our bench tests, and JVC also supports automated calibration via its RJ-45 LAN port and compatible meters.
Why are the contrast numbers in the two ProjectorScreen.com reviews so different?
First, reflective D-ILA panels inherently block far more residual light than transmissive 3LCD panels (roughly 35,274:1 calibrated native on JVC versus 3,951:1 to 5,759:1 native on Epson). Second, Dave Harper tested the Epson on a 1.3-gain Stewart StudioTek 130 G4 screen while Alan Young measured the JVC on a 100-inch 1.0-gain screen from 12 feet, so each review reflects its specific optical setup.
Shop Both Projectors and Read Full Bench Reviews
- Shop Epson Pro Cinema LS12000 4K Laser Projector ($5,999.00)
- Shop JVC DLA-NZ500 Native 4K D-ILA Laser Projector ($5,999.95)
- Read Dave Harper's Full Epson LS12000 Review (published April 27, 2023)
- Read Alan Young's Full JVC DLA-NZ500 Review (published December 3, 2024)
- Browse All Home Theater Projectors on ProjectorScreen.com
