Your Cart

Your cart is empty.
Stewart Balon Edge BALE144SST10EZX Fixed Frame - 144" (56.5x132.5) - [2.35:1] - 1 Gain

Stewart Balon Edge BALG3E144SST10FLX Fixed Frame - 144" (56.5x132.5) - [2.35:1] - 1 Gain (Stewart-BALG3E144SST10FLX)

5.00 stars, based on 9 reviews
Balón Edge This screen system provides a thin, black border that nicely frames the picture. The half-inch black, Velux light absorbing border provides just a touch of projector overscan relief while still providing maximum on-screen image. With a...
VT

Great Screen!

Rating:
review-star review-star review-star review-star review-star
Pros:
Cons:
  • Verified Purchase

Ordered the Stewart StudioTek 130 G4 screen at 133" to replace my 135" Elite Aeon screen. We can start right with the shipping container. This thing came in a massive, heavy duty box.


I could stand in the middle of it when empty without it caving in, and needed to use a saw to cut it up when I was done with it. The screen itself was additionally in a solid cardboard tube.


All of it was packed in tons of thick bubble wrap. After removing it from the box, it was very simple to put together and barely needs instructions at all with the self-explanatory assembly and mounting.


The bezel is very solid, and I like the snaps for the screen material attachment vs velcro or the plastic pegs I've used on other screens. It makes it very easy to make sure there are no creases in the screen even.


The mounting brackets hang on bars that go on the wall which are far easier to level than the widely spaced tiny brackets for my Elite screen. I will say that one downside to the assembly and mount process is that since I ordered a larger screen it came with a center bar that goes from top to bottom, which limited where I could put the mounting brackets, and preventing me from actually being able to line any of the wall bracket holes into studs. I had to drill my own holes into the wall brackets and was able to secure into two studs that way. An annoyance, but it worked out well in the end as it was easy to drill.


I really like the magnets on the bottom of the screen bezel as it fixes an issue I had with my Elite screen where the bottom didn't want to stay back against the wall. However, this also highlighted just how not flat my wall is, haha. Screen performance is top notch.


I noticed not just better color, brightness, and contrast, but a seemingly sharper image than my Elite screen. The whole thing does feel professional, and I do not regret my investment here. Highly recommend this screen. For reference, my projector is a JVC DLA-X790R.


No compromises, it is the best

Rating:
review-star review-star review-star review-star review-star
Pros:
Cons:
  • Verified Purchase

The easiest installation ever. The packaging was very thorough and the precision of the frame makes the pieces just slide into each other. The screen is not the bottleneck for at least 20 years, the bottleneck will likely be your projector or source media. 4K HDR will look amazing, as will 8k and up. It only gets better. And buying from ProjectorScreen.com made everything easy. The delivery was also very fast, especially if you live where the screen is manufactured. Do not compromise on a screen, and this has no compromises.


KS,United States

Stewart WallScreen Deluxe WSDQ110HST10EZX Fixed Fame - 110" (54x96) - HDTV [16:9] - 1 Gain

Rating:
review-star review-star review-star review-star review-star
Pros:
Cons:
  • Verified Purchase

I received this screen in some pretty impressive packaging, so there was no question of it being damaged. The installation was pretty easy. After assembling the fixed frame, the screen material was rolled out on the floor. My wife and I carefully laid it out over the frame and snapped it onto the frame buttons in the pattern called for in the instructions. Everything fit perfectly. To hang the screen, a "z-bracket" is installed on the wall and on the upper part of the screen, and two small magnets are screwed into the wall at where the lower corners of the screen will be. The location of these magnets is critical, so you have to take some care to get them right. We lifted the screen onto the z-bracket and carefully tilted it down onto the magnets, which both "caught" as they should, and the screen was installed! We paired this screen with a DLP laser-source projector (Optima UHZ65), and we have gotten stunning results on both SDR and HDR sources. We watch mostly in a darkened room, and the picture takes your breath away with a 4K HDR program (we use an Apple TV 4K for streaming). The upconverted 1080i signal from our AT&T U-verse receiver is, obviously, not as good but fine for most programming. With the lights on in the room, the picture is somewhat washed out as you would suspect, but the Optoma really does a good job of making a very watchable image. There is very little natural light in the room, even in the afternoon, so that helps a lot. Very nice build quality and picture!


Morristown, NJ

The best projector screen!

Rating:
review-star review-star review-star review-star review-star
Pros:
Cons:
  • Verified Purchase
I upgraded to this screen from a cheap screen because I felt like the picture wasn't as clear as I expected it to be. I set this projector screen up in my basement home theater and the picture quality looks incredible!



I highly recommend this projector screen.

CPS Warranty Included

Purchase this product worry-free with a complimentary 2-year extended warranty from CPS with ACCIDENTAL DAMAGE protection. Want even more coverage? Upgrade to a 3 or 4 year at a discounted price.

Manufacturer’s Pricing Policy

Why do I need to contact you in order to place my order?

As an authorized dealer for the product you are looking at, ProjectorScreen.com is bound by certain agreements with our manufacturer partners in how we display, price and sell certain products.

Some items may not be able to be advertised below a certain price or any pricing at all and others may not be able to be added to a shopping cart via an “add to cart” button.

If a competitor’s website has the same product but is not restricting the display/functionality in the same way that you see here on ProjectorScreen.com, than that competitor is likely NOT an authorized dealer.

What does that mean for you as the customer? It is very likely that the manufacturer may not honor your products warranty, or that your product was never intended for the US market to begin with.

If you have any questions regarding a specific product, please do not hesitate to contact us at (888) 392-4814.