Projector Screen Paint - Remaster Vinyl Screen - Restore and Renew - White - Gallon
Item #: POS-G00RMSTRW
$249.00
Need Help? Chat With an Expert or Call 888-392-4814
Leaves Warehouse within 1-2 Business Days
Free Shipping
Paint On Screen · Project planning
Plan this paint for your space.
Check quantity, understand the finish and review application guidance for this product.
Tell us what you are creating.
Counts show matching Paint On Screen products in our online assortment. A candidate is a starting point for your project.
Reviewing your project
Your coating guidance will appear here.
Measure the surface you will paint.
Use the finished-system area from the current label or technical data sheet, including its required coats. Do not enter a single-coat rate for a multi-coat system.
Estimate flat-screen brightness
A planning estimate, not a measurement of ambient-light rejection or viewing uniformity.
Compare purpose before comparing gain.
A higher gain number is not a universal quality score. Consider projector angle, image area, room light and where people will view the image.
| Coating / finish | Intended use | Gain | What to consider |
|---|
Gains apply to the listed coating and application. Gain is not applicable to room treatments or chroma-key backgrounds. FLOOR has no published numerical gain. View each coating for its specifications.
Before you paint
Specifications & application support
Use the current product-specific instructions when they differ from general wall-paint guidance.
Have your product name and batch number ready when requesting instructions.
Try the finish in your own space.
Ask about sample options and tell us your projector, lighting, surface and viewing positions. Sample availability and the right preparation depend on the coating.
Ask about a sample or project review →Plan the preparation, too.
Choose preparation and tools after reviewing the coating and substrate.
Paint planning questions
Does paint remove the need to control room light?
No. Light reaching the surface can reduce image contrast. Review the light direction, projector placement and viewing positions together.
Does more gain always mean a better picture?
No. Gain describes reflected brightness in a specified geometry. Uniformity and off-axis appearance matter too, especially for moving audiences and blended images.
Does the coverage estimate include the required coats?
The standard wall-paint estimate uses finished two-coat coverage. Specialty systems require their own confirmed rate. Preparation, application and waste can change the amount needed.
When can I use the surface?
Dry to touch, ready to recoat and ready for service are different stages. Follow the current product documents for your conditions; projection floors also have traffic requirements.
Overview
Remaster – White
Restore and renew. A spray-applied coating that takes your old roll-up or hanging vinyl screen and brings it back to better-than-new performance — in Ultra Bright White.
The Proper Way to Remaster Your Old Screen
Paint On Screen Remaster is a spray-only coating that can take your old roll-up or hanging vinyl screen and bring it back to better-than-new performance.
Remaster is a great solution for screens that need to remain in place but need attention due to damage, smoke, fading or discoloration, new performance requirements for a new projector, or any other reason you do not want to remove the screen.
This version is Ultra Bright White with a 1.1 gain. Remaster is also available in Ultra Bright White (1.1), High Contrast Grey (1.4) and Silver (2.2).
Key Features
Renew Instead of Replace
Older screens can yellow, pick up surface debris, fade or lose their original performance over time.
Replacing an installed screen often means new hardware, new electrical work and labor. Remaster restores the surface in place.
You can even change the screen's character — choose white, grey or silver to suit a new projector or a brighter room.
Bring Installed Screens Back to Life
Residential
Home theaters and media rooms with aging, stained or faded roll-up or fixed vinyl screens.
Commercial
Schools, conference rooms, houses of worship, auditoriums, hotels and venues with installed screens that need to stay in place.
Precision Spray Application
Remaster – White is designed for HVLP spray application onto a clean, properly prepared surface.
For the sharpest projected image, the underlying surface should be as smooth and defect-free as possible.
Recommended Application
Ensure the vinyl screen is clean, dry and fully extended and supported so the surface stays flat during spraying.
Precious-metal and specialty coatings are built up in multiple very thin layers rather than one or two heavy coats.
The smoother and more uniform the primed surface, the more uniform the finished projection surface will be.
For best results, apply when the ambient temperature is above 50°F (10°C), relative humidity is 85% or less and the moisture content of the screen surface is below 15%.
HVLP Spray Application
Remaster – White is a specialty coating applied with an HVLP spray system using minimal fluid flow.
Spray Tip: 1–2 mm HVLP
Pressure: Approximately 35 PSI (±10 PSI)
Coats: 4–8 very light passes
Finished Dry Thickness: Approximately 3–4 mils
Each pass should be barely noticeable — the coating should never look wet, runny or saggy. Slowly build up the layers until the surface is evenly coated and the background is no longer visible.
Spray Setup & Technique
Remove any water from the air compressor and use an inline desiccant filter so moisture cannot reach the coating.
Mix the coating thoroughly with a paddle and drill — shaking alone is not enough — then strain it through a 100-mesh or finer strainer.
Apply only one light pass per coat and allow at least 5 minutes between passes, or until the surface appears dry with a matte look.
Product Specifications
| Product | Remaster Vinyl Screen – Restore and Renew – White |
| Manufacturer | Paint On Screen |
| Manufacturer Part Number | G00RMSTRW |
| Size | 1 US Gallon / approximately 3.7–3.78 Liters |
| Gain | 1.1 |
| Color | Ultra Bright White |
| Application | Spray Only (HVLP) |
| Use | Restoring roll-up and hanging vinyl projection screens |
| Coverage | Approximately 170 sq. ft. per gallon |
| Other Versions | Ultra Bright White 1.1 · High Contrast Grey 1.4 · Silver 2.2 |
Better-Than-New Performance — Without Replacing the Screen
Paint On Screen Remaster White restores your existing vinyl screen in place, renewing gain and contrast while correcting fading, staining and damage.
Downloads & Resources
Download application instructions.
Specs
Item #: POS-G00RMSTRW
Manufacturer Part #: G00RMSTRW
Get Up To $ Cash Back
After you purchase this product from us:
- Leave us a 50+ word review and get $ refunded
- Attach a picture to your review for an additional $0 refund
If we think your review is really good and worth sharing on our Facebook page, we will give you an extra $0 refund as well.
Spend 5 minutes helping us and other potential customers by sharing your honest opinion and you can make a quick $.
