Draper 143012CB Ultimate Access/Series V 84 diag. (50x67) - Video [4:3] - CineFlex CH1200V 1.2 Gain
Item #: Draper-143012CB
$7,830.00
Leaves Warehouse within 5-10 Business Days
Free Shipping
Overview
ULTIMATE ACCESS V ELECTRIC PROJECTION SCREEN
Complete concealment and smooth, clean design make the Ultimate Access V ideal for boardrooms, mid-sized training rooms, universities, or home theaters. Retracted, the projection screen completely conceals behind a smooth, lower panel in the ceiling with no exposed screw heads or fasteners. During use, a second motor opens the lower panel upward into the case to allow the screen to descend into the room. Draper’s RF welded tabs create a more durable seal that eliminates separation and stickiness to deliver a perfectly flat viewing surface. Installation of the case during the initial phase of construction eliminates job site damage allowing for installation of the screen at a later time.
Viewing surfaces available with this model are:
| Matt White XT1000VB |
| Grey XH600V |
| Pure White XT1300V |
| CineFlex CH1200V |
| CineFlex White XT700V |
Features
- Case dimensions are 9-7/8" high x 8" deep (25 cm x 20 cm), includes trim flange. Built-in controls may increase case length. Mounting brackets may add to case dimensions
- Maximum image width up to 12' (366 cm) wide, depending on surface selection.
- RF welded tabs eliminate stickiness and tab separation. Tabs warranted against separation for five years.
- Image area fully framed with black. Standard 12" (30 cm) black drop at top of viewing area.
- Adjustable or removable hoisting brackets included for easy lifting during installation.
- Sliding brackets on top of the case allow for adjustments for mounting.
- Sliding brackets inside case accommodate different size screens.
- Bottom closure panel detachable or hangs in place with “T” bracket to provide accessibility for service or maintenance.
- Fully automatic ceiling closure panel provides complete screen concealment. Can be finished by contractor to match ceiling.
- Independently motorized ceiling closure opens into the case.
- Quick-connect wiring allows for early installation of the case with the addition of the screen later.
- Includes a 110V three-position switch (standard). Quiet, low voltage motors and 220V options are available.
- Low voltage, video interface or other controls can be built into housing for below ceiling access.
- White case standard, black available upon request.
- Custom sizes available.
Supporting Documents
Projection Surface
Cineflex CH1200V
Neutral grey rear projection diffusing surface. Provides high resolution and excellent contrast, even in lighted rooms. Recommended for use with low to medium output projectors. Moderate viewing cone.
This surface was previously named Cineflex.
Surface Characteristics
- Maximum Height Without Seams: 144"
- Weight (g/sm): 333
- Thickness (mm): 0.3
- Cleaning: Mild Soap and Water
- Composition: Flexible
Surface Material Properties
| Maximum Size | 12' Height |
| Peak Gain | 1.2 |
| Half Gain | 30 Degrees |
| Acoustically Transparent | No |
| Front / Rear Projection | Front |
| Flame Resistance | Yes |


Specs
Item #: Draper-143012CB
Manufacturer Part #: 143012CB
Get Up To $ Cash Back
After you purchase this product from us:
- Leave us a 50+ word review and get $ refunded
- Attach a picture to your review for an additional $0 refund
If we think your review is really good and worth sharing on our Facebook page, we will give you an extra $0 refund as well.
Spend 5 minutes helping us and other potential customers by sharing your honest opinion and you can make a quick $.
