Choose how you want to operate the screen, such as with a wall control, remote or compatible automation connection. Then confirm the exact motor, receiver and accessories required. Check what is included and how the screen can be operated independently if needed. For material, tensioning and mounting selection, use our main motorized-screen guide.

Further reading: Related collection and details

The motor raises and lowers the surface, which can be useful when the housing is high or the screen is part of an automated room. A manual model avoids motor power and control wiring but still requires safe reach and controlled retraction. Compare surface quality, tensioning and image height separately from the operating mechanism. A motor does not automatically provide a flatter screen or a material suited to your projector.

Further reading: Screen buying guide

Use a housing and brackets that explicitly support the chosen attachment. Check bracket spacing, load and the clearance needed for the fabric and bottom bar to travel without hitting trim, a television or furniture. Establish the image height before fixing the case position. If you want the housing concealed, compare a purpose-built recessed model rather than assuming every wall/ceiling housing can be installed inside a ceiling.

Further reading: Screen buying guide

Some do. The surface must support the UST light path, and the deployed screen must be sufficiently flat for the steep projection angle. Confirm the specific fabric and tensioning configuration, not just the motorized label. A ceiling-down and a floor-rising screen may also present different orientation and placement requirements. Match the entire screen to the projector’s installation chart before ordering.

Further reading: UST buying guide · Screen buying guide

Measure the complete housing, mounting points, viewable width and height, top drop and bottom-bar travel. Include service access and power/control cable entry. Compare the lowered screen with doors, cabinets and speakers, since the room must accommodate both its stored and deployed states. The advertised diagonal describes the image opening; it does not describe the case length or the space required to install and operate it.

Further reading: Screen buying guide

Choose the method that suits how the room is used, then confirm compatibility with the particular motor and receiver. A remote offers convenient independent operation; a wall control provides a fixed operating point; a supported trigger can coordinate deployment with the projector. Check whether accessories, wiring and adapters are included. Keep an independent operating method available where the screen’s control system supports it.

Further reading: Screen buying guide

A tab-tension system applies controlled tension along the sides of the screen to help maintain its deployed shape. It is particularly useful when a projector makes small waves visible. Compare tensioning with the material’s optical requirements and the expected image size. A tensioned fabric can still be the wrong ALR type for a particular throw geometry, so confirm both the mechanical and optical specifications.

Further reading: Screen buying guide

Allow access to the motor, control receiver, power connection and the service points identified in the screen manual. Recessed installations should not trap equipment behind a finished ceiling without the intended access route. Check how the fabric or motor can be serviced and what must be removed. Planning access at the beginning is easier than opening a cabinet or ceiling after an avoidable compatibility or control problem.

Further reading: Screen buying guide