Expert reviews
Cima BC
Retractable, Below Ceiling Screen System
Engineered for the daily grind and built to last
Cima BC is offered in a wide assortment of preconfigured size ranges and in HD, Scope or 16:10 formats. Each screen comes standard with either a 6 or 12 inch black drop and includes a standard control system integrated into the screen enclosure. Choose either Neve, an exemplary matte white imaging surface, or Tiburon G4, a neutral density gray matte surface for aiding black level performance. Cima BC comes with versatile bracketing, hidden terminations and is easy to install.
This screen is used most commonly in:
Cima blows up the competition
This versatile, below ceiling screen is built to last — and it does. If you do not need a custom screen but still want a product made with lasting integrity, this is the screen for you.
Proprietary control system integrated into the case
The Cima screen controller features 12 volt trigger functionality, or low voltage up-down-stop capability. Installation of this ETL approved projection screen is super easy. With a pigtail or AC power cord that is furnished for the line voltage connection and a convenient RJ25 connector located on the exterior of the case, the control hookup is truly effortless. Alternatively, an available upgraded controller can offer enhanced signaling options when IR, serial or IP control is required.
Standard sizes, easy ordering and quick shipment
Cima screens are manufactured in a wide assortment of sizes and feature several aspect ratios. These screens are a fast turnaround.
Owner's Manual
The perfect balance between the widest possible viewing cone and the best possible viewing conditions. For applications without proper light control.
The shade of gray is held super tight to spectral neutrality, no shift in color of any type.
Click to download spec sheet.
Surface Characteristics
- Textureless Surface Intended for 1080p+ / UHD / 4K Projection
- Extremely Durable
- Washable and Mildew Resistant
- Flame Retardant
- Greenguard™ Certified
- ISF™ Certified
Surface Material Properties
| Maximum Size |
8.83' x 90' Seamless |
| Peak Gain |
0.8 |
| Half Gain |
80 Degrees |
| Ambient Light Front Reflectance Value |
60% |
| Ambient Light Resistance |
Good |
| Minimum Throw Distance |
1.3 x image width |
| Edge Blending Properties |
Poor |
| Passive 3D use |
No |
| Lay Flat Quality |
Excellent |
| Flame Resistance |
Yes |
| Perforate |
Yes |
JVC's DLA-RS400 is the industry's most affordable Custom Install D-ILA projector.
It delivers stunning picture detail and an unprecedented value thanks to JVC's exclusive 4K e-shift4 technology.
It accepts native 4K 60P (4:4:4) content through Full Speed 18Gbps HDMI/HDCP 2.2 compatible inputs and up-converts existing 1080P sources to 4K precision.
Three discrete D-ILA devices produce a stable image with no flicker and class leading 40,000:1 Native Contrast Ratio for peak whites and deep blacks.
For 2016, JVC projectors include HDR (High Dynamic Range) content compatibility and an improved Clear Motion Drive for unmatched picture quality, as well as a newly developed high power lamp that provides 1700 lumens: the highest in-class brightness.
Superb Picture Quality
- 1700 Lumens with High Power Lamp (PK-L2615U)�Upgraded for 2016
- Three 1920x1080(x3) 0.7-inch D-ILA devices
- e-shift4 4K Precision 3840 X 2160 Projected Image�Upgraded for 2016
- Dual Full Speed 18Gbps HDMI/HDCP 2.2 Compatible Inputs�Upgraded for 2016
- IMPROVED - Multi Pixel Control (MPC) with Auto Mode for ease of use�Upgraded for 2016
MPC works with 4K60P (up to 4:4:4) signals - HDR (High Dynamic Range) Compatible �NEW for 2016
- Motion Enhance (2D, 3D, 4K) with Upgraded Clear Motion Drive�Upgraded for 2016
- 3D Enabled (Active Shutter Method)
- Accepts Frame Sequential, Side-by-Side, and Top-Bottom
- 3D Anamorphic Capable
- 3D Crosstalk Cancellation
- 3D Parallax Adjustment
- Optional Active 3D Glasses (PK-AG3G) and RF Emitter (PK-EM2G)
- Clear Black Signal Processing
- Native contrast ratio: 40,000:1
- Intelligent Lens Aperture increases dynamic contrast ratio to 400,000:1
Highly customizable
- Darkness and lightness correction
- Lens memory function memorizes 5 positions for focus, zoom and shift.
Maintains constant height for 2.35, 1.85, 1.78 on same screen. - 117 memory positions on Screen Adjustment Mode
- Convergence Correction � 1/16th pixel increments with 2 memory positions
- Simplified 6-Axis Color Management System �NEW for 2016
- Manual Gamma Control included with JVC Calibration Software 6�NEW for 2016
- Control4 SDDP (Simple Device Discovery Protocol)�NEW for 2016
- LAN connection for system control and firmware updates
- Remote control via LAN, RS-232C, IR
- 12V Screen Trigger Output
- V: 80%/H: 34% motorized lens shift
- 1.4:1 to 2.8:1 lens throw
- 2 year warranty
| Device | 0.7 inch Full HD D-ILA (1920 X 1080) X3 |
| 4K e-shift4 Technology | Yes |
| Resolution | 3840 X 2160 *1 |
| Lens | 2X Zoom, Motorized Focus, f=21.4 to 42.8mm/F3.2-F4 |
| Lens Shift | +/- 80% Vertical and +/- 34% Horizontal (Motorized) |
| Projection Display Size | 60 inch-200 inch (diagonal) |
| Light Source Lamp | NSH 265W (lamp life approx. 4,500 hours when lamp is in Low mode) |
| Brightness | 1,700 Lumens *2 |
| Contrast Ratio | Dynamic: 400,000:1
Native: 40,000:1
|
| Input Terminal | HDMI X2 (Full Speed 18Gbps HDMI/HDCP 2.2 Compatible w/ HDR) |
| Output Terminals | Trigger (DC12V, 100mA), 3D Syncro (Mini DIN 3 pin) |
| Control Terminals | RS232C (D-sub 9 pin), LAN (RJ45) |
| Video Input Signal Format | 480p, 576p, 720p 60/50, 1080i 60/50, 1080p 60/50/24, 3840x2160p 60/50/24, 4096x2160p 24 *3 |
| PC Input Signal Format (HDMI) | VGA/SVGA/XGA/WXGA/FWXGA/WXGA+/SXGA/WXGA++/WSXGA+/WUXGA |
| 3D Format | Frame Packing: 720p 60/50, 1080p 24, 1080i 60/50
Side-by-Side (half): 720p 60/50, 1080p 60/50/24, 1080i 60/50
Top & Bottom: 720p 60/50 1080p 24 |
| Power Consumption | TBA |
| Fan Noise | 21dB (When the lamp is in Low mode) |
| Power Requirement | AC100V-240V, 50/60Hz |
| Dimensions (W x H x D) | 17 7/8" x 7" x 18 1/2" |
| Weight (net) | 34lbs |
*1 Resolution is 1920 X 1080 in 3D mode.
*2 Measurement, Measuring conditions, and method of notation all comply with ISO 21118
*3 When the video input signal is 4096x2160, data above 3840 is cropped equally on the left & right.