Free Shipping on all orders!
Call toll-free 1-888-392-4814
Mention code direct when placing order

Grandview FC-MI120(169)UHD130(AACW) Fancy Motorized Tab-Tension 120"(59x105) - [16:9]

5.00 1
Item #: GV-FC-MI120(169)UHD130(AACW)
Manufacturer Part #: FC-MI120(16:9)UHD130(AACW)
Special Features:
Tensioned
Supported Resolution:
4K
Surface Color:
White
Screen Type:
Electric
Mount Type:
Wall and Ceiling
Format:
HDTV [16:9]
Brand:
Grandview
Viewable Diagonal in.:
120
Viewable Width in.:
105
Viewable Height in.:
59
Product Status:
Leaves Warehouse within 1-2 Business Days
Gain:
1.3
Case Color:
White
Product Line:
Fancy
Front/Rear Projection:
Front
Projection Surface:
UHD 130 White
 
OPTIONS:

| Read All Reviews | Write a review
View All Items in This Product Line / Series
Leaves Warehouse within 1-2 Business Days

Choose up to 6 products to compare

Grandview FC-MI120(169)UHD130(AACW) Fancy Motorized Tab-Tension...
Price: $2,594.38
Questions about this product? 

“Since its humble beginnings, Grandview Screen USA has evolved and grown through working with other innovative companies; Next Projection (ProjectorScreen.com / 4KProjectors.com) has and will always be a unparalleled partner for Grandview. With their expertise and experience, they are always able to provide the best solutions for their customers. We trust that with Next Projection, customers are always going to get the best price, products and service.”

Leon TangDirector, Grandview Screen USA
hisense
Fancy Series
Tab-Tension Motorized Screen

The Fancy Series is designed based on the benchmarks of the Fantasy Series, which is similar in performance and options as the Cyber Series. New design elements include the screw-free endcap design, and patented Spring-Sealed Mechanism that ensures a smooth and enclosed finish. The Grandview Fancy Series is designed to seamlessly integrate with any type of décor.


  • Sizes: 92” – 150” diagonal
  • Installation Options: Floating Wall Mount / Ceiling Mount / Suspended Mount (using the “L bracket”)
  • Control Options: IR / RF / RS485 + Dry Contact Control / 3-12 Voltage Trigger Control / Central Control
  • Colour: Matte White
  • Aluminum Casing

Other Items In This Series

GV-FC-MI120(169)UHD130(AACW) Reviews
Rating:
Love my HD 130 Grandview 120" screen

As soon as Grandview released their ISF-certified 1.3 gain screen material, I put it in my curved Grandview 120" 16:9 screen frame and the results were everything I wished for. I started out with Grandview's .8 gain grey fabric, because my room wasn't fully light controlled. It gave me a good picture, but the ambient light in my room really lessened the Contrast Ratio. I managed to turn the room into a "Batcave" (fully dark) and switched to the 1.0 gain matte white. It was a terrific picture but I had to run the projector (Sony HW30ES) in high lamp with the large 120" screen. Because of this, and because I wanted to switch to a 4K projector with HDR; as soon as the 1.3 gain HD130 material became available, I switched again. What a difference.


I now run in low lamp mode, almost doubling the life of the projector lamp and the colors of this isf-certified material are fantastic. From a viewing distance of 10 feet, I can't see any pixels from my current 1080p projector, there is no screen texture to be seen and there are no "sparkles" from the screen coating. In my previous house, I had a large Cinemascope 12' wide Stewart Studiotek 130 screen and to be frank, this Grandview screen at one-quarter the cost for an equivalent size looks just as good to my non-expert eyes.


The screen arrived in a package that was the same length as the one-piece top and bottom rails, so it was easy to get it up the elevator to my new Condo. It was so well packed that it took an hour to get all the pieces ready for assembly. I went from unpacked to on the wall in three hours, working alone. The assembly was really easy, the fabric attachment method is simple and results in a very tight screen. The wall attachment method is dead simple--just put a single screw in the middle of the top rail at the height you want for the top of the screen, use a level to fix the position of the other screws and let the bottom rail dangle on the built-in positioning straps and just screw them in at the height where they dangle.


The screen was light and rigid enough for me to lift it up on the mounting rails by myself. I wrote how I have changed the fabric twice and the mounting system for the frame and the fabric is so simple that it only takes me an hour to do this from taking it off the wall to putting it back on the wall. I absolutely recommend this screen and it's perfect for do-it-yourselfers like me.

© 2021. All rights reserved ProjectorScreen.com | Proudly Made in the U.S.A.